MONITORING AND OPTIMIZATION Essay, Research Paper PERFORMANCE MONITOR AND NETWORK MONITOR PERFORMANCE MONITOR Windows NT Object Counters in Performance Monitor
MONITORING AND OPTIMIZATION Essay, Research Paper
PERFORMANCE MONITOR AND NETWORK MONITOR
Windows NT Object Counters in Performance Monitor
CacheL2 cache performance
Logical diskMass storage performance, including network storage
MemoryMemory performance and usage
ObjectsProcess and tread counts
Paging fileVirtual memory usage
Physical diskHD performance
Process Performance of executing processes
Processor Processor(s) performance
SystemWindows NT performance
Thread Individual thread performance
You will also see objects for each network service installed.
MONITORING FOR PROCESSOR BOTTLENECKS
MAJOR PROCESSOR RELATED COUNTERS TO WATCH:
Processor: %Processor Time – How busy the microprocessor is. Processor is a bottleneck if sustained >80%
Processor: Interrupts/sec – Rate of service requests from peripheral devices. If you have a high rate of interrupts/sec with no corresponding hardware functions then you may have a bad piece of hardware. Should be between 100 and 1000. Spikes to 2000 are ok.
System: Processor queue length – Number of threads waiting to be serviced. >2 then processor is a bottleneck. Queue length will always be zero unless you are also monitoring a thread specific counter (Context switches/sec is number of threads switched/sec by the processor and is good to use).
MONITORING THE DISK FOR BOTTLENECKS
IF THE DISK LIGHT IS ON ALL THE TIME, YOU NEED MORE RAM
More Ram will increase the size of the disk cache and decrease page swapping to disk and will increase the apparent speed of the disk.
Logical disk vs. Physical disk
Two different objects in Performance monitor.
Logical disk measures performance of stripe sets, volume sets and mapped network drives.
Physical disk measures real transfers to and from actual hard disk or RAID set. Used to compare disks and to provide specific information about a disk.
MAJOR DISK RELATED COUNTERS TO WATCH:
Memory: Pages/sec shows the number of memory pages swapped out to disk per second. Useful with %disk time: modify the size of the page file and watch the result of these two disk counters.
%Disk time does not directly measure the disk. It shows how much time the processor is spending servicing disk requests. Use with Processor: %Processor Time to determine if the disk is eating up the processor.
Disk bytes per second shows how fast your disk is. Copy a big file and see if your disk is way fast or a piece of junk.
Average disk bytes per transfer shows how big the average transfer is. Larger transfers are more efficient.
Current Disk queue length shows how much data is waiting to be transferred to disk. A long queue means you need a faster disk.
NOTE: You must enable disk counters, they are disabled by default and will cause a degradation of about 2% in performance due to processor load of the counter.
To enable disk performance counters: type diskperf -y at the command prompt to enable auto counter startup at boot. Reboot.
To disable disk performance counters: type diskperf -n at the command prompt to disable auto counter startup at boot. Reboot.
Is a trimmed down version of what ships with SMS.
Is installed by adding Network monitor tools and agent through the services tab of the network icon in control panel.
Can provide real time and cumulative saved data.
FOUR MAIN SECTIONS
Bar graph in real time.
Session statistics shows cumulative data about conversations taking place on the network in real time.
Station statistics shows information on each conversation. You must specify the machine (station) you want to monitor and is cumulative for the monitoring period.
Summary statistics are cumulative and show network, captured, per second, NIC (MAC), and NIC error statistics.
Data can be filtered by protocol, computer address, or protocol properties. Filter by computer address to identify a NIC sending data frames when not in use (bad NIC).
Netmon can be dual password protected and will let you identify other instances of Netmon running on the network. This is to prevent unauthorized users from capturing data to which they do not have permission to access.
??? Conflict ???
Sybex Network Press: MCSE NT Server 4 Study Guide says, ?The limited version of network monitor that ships with Windows NT Server does not support promiscuous mode. Therefore, it can capture only packets sent to the server or to all stations.?
Windows NT Online Help for Performance Monitor says, The Nework Monitor agent collects statistics from the computer?s network adapter card by putting it in promiscuous mode.?
|◯||Monitoring Affects Motivation Essay Research Paper While|
|◯||Electronic Monitoring In The Workplace Essay Research|
|◯||Electronic Monitoring Today Essay Research Paper Electronic|
|◯||Big Brother Little Sister Computer Monitoring Essay|
|◯||Performance Appraisel Essay Research Paper PERFORMANCE APPRAISALPerformance|
|◯||Untitled Essay Research Paper Electronic Monitoring vs|
|◯||Performance Appraisals Essay Research Paper IntroductionWe have|
|◯||Electronic Monitoring Essay Research Paper Electronic MonitoringLast|
|◯||Performance Enhancing Drugs Essay Research Paper Many|
|◯||Federal Monitoring Of The NYPD Essay Research|